Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
- 3. General data
   + 3.1. Cars with petrol engines
   - 3.2. Cars with diesel engines
      - 3.2.1. Changes in a car design from 1988 to 1993.
         3.2.1.1. Dm3 engine 2,3
         - 3.2.1.2. Dm3 engine 1,8
            3.2.1.2.1. Technical characteristics
            3.2.1.2.2. Head of the block of cylinders
            3.2.1.2.3. Block of cylinders
            3.2.1.2.4. Krivoshipno-shatunny mechanism
            3.2.1.2.5. System of gas distribution
            3.2.1.2.6. Lubrication system
            3.2.1.2.7. Cooling system
            3.2.1.2.8. Fuel system
            3.2.1.2.9. Tightening moments
            3.2.1.2.10. Adjustment of the engine
         + 3.2.1.3. Fuel system
         + 3.2.1.4. The repair which is not demanding removal of the engine
         3.2.1.5. Removal and installation of the engine
         3.2.1.6. Dismantling of the engine
         3.2.1.7. Check of details
         3.2.1.8. Check of gaps of a bent shaft and rods
         3.2.1.9. Assembly of the engine
         3.2.1.10. Lubrication system
         3.2.1.11. Cooling system
         3.2.1.12. Coupling
         3.2.1.13. Mechanical MT 75 five-speed transmission
         3.2.1.14. Power shaft and back bridge
         3.2.1.15. System of steering
         3.2.1.16. Forward suspension bracket
         3.2.1.17. Brake system
         3.2.1.18. Electric equipment
         3.2.1.19. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



3.2.1.2.7. Cooling system

GENERAL INFORMATION

The closed contour of cooling with the nonfreezing liquid circulating under pressure contains a radiator, the pump of cooling liquid, a broad tank, the thermostat and the fan with the electric motor operated by the thermoswitch located in a thermostat cover.

Radiator

The radiator with a cross stream has the heat exchanger from alloy of aluminum and tanks from artificial material.

Broad tank

The broad tank from artificial material, in a stopper has the valve of bilateral action.

Pump of cooling liquid

The centrifugal pump of cooling liquid is put in action by a gear belt of the drive of system of gas distribution.

Thermostat

The wax thermostat is located sideways heads of the block of cylinders.

Temperature began opening: 84 ° –89 °C.

Temperature of full opening: 102±3 °C.

Fan

The fan is put in action by the electric motor operated by the thermoswitch located in a thermostat cover.

Cooling liquid

Quantity: 8,6 dm3.

Type: mix of 60% of the distilled water and 40% of the special nonfreezing mix Motorcraft with the designation Ford SSM 97 B 9103 A.

Frequency of replacement: each 3 years.