Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
- 3. General data
   + 3.1. Cars with petrol engines
   - 3.2. Cars with diesel engines
      - 3.2.1. Changes in a car design from 1988 to 1993.
         3.2.1.1. Dm3 engine 2,3
         + 3.2.1.2. Dm3 engine 1,8
         + 3.2.1.3. Fuel system
         + 3.2.1.4. The repair which is not demanding removal of the engine
         3.2.1.5. Removal and installation of the engine
         3.2.1.6. Dismantling of the engine
         3.2.1.7. Check of details
         3.2.1.8. Check of gaps of a bent shaft and rods
         3.2.1.9. Assembly of the engine
         3.2.1.10. Lubrication system
         3.2.1.11. Cooling system
         3.2.1.12. Coupling
         3.2.1.13. Mechanical MT 75 five-speed transmission
         3.2.1.14. Power shaft and back bridge
         3.2.1.15. System of steering
         3.2.1.16. Forward suspension bracket
         3.2.1.17. Brake system
         3.2.1.18. Electric equipment
         3.2.1.19. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





3.2.1.7. Check of details

GENERAL INFORMATION

It is recommended to clear and wash up carefully details which will be used again. Extraction of traffic jams and caps from the block of cylinders and a head of the block of cylinders considerably facilitates their washing. All laying and sealing rings should be replaced at each dismantling of the engine.

Check of the sizes specified in a technical characteristic and comparison them with real values resolve an issue whether the detail can be used further, repaired or replaced with new. Also the condition of their surface testifies to suitability of some details (scratch, a sink, etc.).