Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      - 3.1.3. Changes in a car design from 1984 to 1986.
         3.1.3.1. Engine
         3.1.3.2. Head of the block of cylinders
         3.1.3.3. Block of cylinders of the engine
         3.1.3.4. Krivoshipno-shatunny mechanism
         3.1.3.5. Bent shaft
         3.1.3.6. System of gas distribution
         3.1.3.7. Engine mount
         3.1.3.8. Cooling system
         + 3.1.3.9. Carburetor
         3.1.3.10. System of injection of fuel
         3.1.3.11. System of ignition
         3.1.3.12. Coupling
         3.1.3.13. Mechanical four-speed transmission
         3.1.3.14. Mechanical five-speed transmission
         + 3.1.3.15. Automatic Ford A 4 LD transmission
         3.1.3.16. Power shaft and back bridge
         3.1.3.17. System of steering with the hydraulic booster
         3.1.3.18. Forward suspension bracket
         3.1.3.19. Back suspension bracket
         3.1.3.20. Brake system
         + 3.1.3.21. Electric equipment
         3.1.3.22. General data
      + 3.1.4. Changes in a car design from 1987 to 1989.
      + 3.1.5. Changes in a car design from 1990 to February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





3.1.3.19. Back suspension bracket

GENERAL INFORMATION

NAVES OF BACK WHEELS

Nuts of naves of back wheels

Since September, 1983 (a code of date of production "DJ") are entered самоконтрящиеся nuts with the left and right carving and the fixing part from artificial material. Also the direction of a carving on the ends of a half shaft is changed. The right half shafts, and left – the left half shafts have the right carving.

Moment of tightening of nuts of new type: 270±20 Nanometers.

Other information concerning a technical characteristic, adjustment and repair of a back suspension bracket is provided in subsection 9.2.