Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      - 3.1.3. Changes in a car design from 1984 to 1986.
         3.1.3.1. Engine
         3.1.3.2. Head of the block of cylinders
         3.1.3.3. Block of cylinders of the engine
         3.1.3.4. Krivoshipno-shatunny mechanism
         3.1.3.5. Bent shaft
         3.1.3.6. System of gas distribution
         3.1.3.7. Engine mount
         3.1.3.8. Cooling system
         + 3.1.3.9. Carburetor
         3.1.3.10. System of injection of fuel
         3.1.3.11. System of ignition
         3.1.3.12. Coupling
         3.1.3.13. Mechanical four-speed transmission
         3.1.3.14. Mechanical five-speed transmission
         - 3.1.3.15. Automatic Ford A 4 LD transmission
            3.1.3.15.1. Technical characteristics
            3.1.3.15.2. Service and repair
            3.1.3.15.3. Changes in a design of the automatic transmission
         3.1.3.16. Power shaft and back bridge
         3.1.3.17. System of steering with the hydraulic booster
         3.1.3.18. Forward suspension bracket
         3.1.3.19. Back suspension bracket
         3.1.3.20. Brake system
         + 3.1.3.21. Electric equipment
         3.1.3.22. General data
      + 3.1.4. Changes in a car design from 1987 to 1989.
      + 3.1.5. Changes in a car design from 1990 to February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



3.1.3.15.3. Changes in a design of the automatic transmission

GENERAL INFORMATION

Since February, 1986 (a code of date of production of "GY") the method of fastening of the back holder of the engine is changed. The new limiter has the cap form. In case in the senior models sharp braking were resulted by movement of the lever of gear shifting, it is necessary to replace the limiter of movement of the limiter of new type.