Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      + 3.1.3. Changes in a car design from 1984 to 1986.
      - 3.1.4. Changes in a car design from 1987 to 1989.
         3.1.4.1. OHC engine
         + 3.1.4.2. Dm3 CVH 1,8 engine
         - 3.1.4.3. DOHC engine
            - 3.1.4.3.1. Technical characteristics
               3.1.4.3.1.1. Head of the block of cylinders of the engine
               3.1.4.3.1.2. Block of cylinders of the engine
               3.1.4.3.1.3. Krivoshipno-shatunny mechanism
               3.1.4.3.1.4. System of gas distribution
               3.1.4.3.1.5. Lubrication system
               3.1.4.3.1.6. Cooling system
               3.1.4.3.1.7. Fuel system
               3.1.4.3.1.8. System of ignition
               3.1.4.3.1.9. Tightening moments
         + 3.1.4.4. Service and repair
         + 3.1.4.5. Coupling
         3.1.4.6. Mechanical five-speed transmission of N type
         + 3.1.4.7. Mechanical MT 75 five-speed transmission
         3.1.4.8. Automatic transmission
         3.1.4.9. Forward suspension bracket
         + 3.1.4.10. Brake system
         + 3.1.4.11. Electric equipment
         3.1.4.12. General data
      + 3.1.5. Changes in a car design from 1990 to February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





3.1.4.3.1.9. Tightening moments

GENERAL INFORMATION

Bolts of a head of the block of cylinders:
  – the 1st stage (M11 bolts – sequence 1 – 10)
25 Nanometer
  – the 2nd stage (M11 bolts – sequence 1 – 10)
55 Nanometer
  – the 3rd stage (M11 bolts – sequence 1 – 10)
to tighten on 90 °
  – the 4th stage (M11 bolts – sequence 1 – 10)
to tighten on 90 °
  – the 5th stage (M8 bolts – sequence 1 – 13)
24 – 27 Nanometers
Cover of a head of the block of cylinders
6 – 8 Nanometers
Casing of system of gas distribution
65 – 95 Nanometers
The directing chains of the drive of system of gas distribution:
  – top
10 – 13 Nanometers
  – lower
24 – 28 Nanometers
Asterisks of cam-shafts
55 – 63 Nanometers
Covers of bearings of cam-shafts
22 – 26 Nanometers
Covers of radical bearings
90 – 104 Nanometers
Covers of rods
26 – 34 Nanometers
  – 1st stage
6 – 8 Nanometers
  – 2nd stage
15 – 17 Nanometers
  – 3rd stage
to tighten on 85 ° – 95 °
Damper of tortional fluctuations of a bent shaft
110 – 130 Nanometers
  – 1st stage
45 – 58 Nanometers
  – 2nd stage
to tighten on 80 ° – 90 °
The oil pump to the block of cylinders
8,5 – 11,5 Nanometers
Pulley of the oil pump
16 – 19 Nanometers
Tension device of a cardan chain of the oil pump
10 – 13 Nanometers
Pump of cooling liquid
21 – 28 Nanometers
Pulley of the pump of cooling liquid
21 – 28 Nanometers
Thermostat case
9 – 12 Nanometers