Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Check of a compression
      4.2.7. Removal of air from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of speed of idling
      - 4.2.11. The repair which is not demanding removal of the engine
         + 4.2.11.1. Head of the block of cylinders
         4.2.11.2. Removal and installation of the engine
         - 4.2.11.3. Dismantling, repair and assembly of the engine
            4.2.11.3.1. Installation of the back radical bearing
            4.2.11.3.2. Assembly of knot piston rod
            4.2.11.3.3. Assembly of the drive of system of gas distribution
            4.2.11.3.4. Further assembly of the engine
         + 4.2.11.4. Lubrication system
         + 4.2.11.5. Cooling system
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





4.2.11.3.3. Assembly of the drive of system of gas distribution

GENERAL INFORMATION

System of gas distribution

1 – casing of a driving chain of system of gas distribution,
2 – laying of a casing,
3 – intermediate plate,
4 – laying of a plate,
5 – cam-shaft asterisk,
6 – chain of system of gas distribution,
7 – asterisk of the tension device of a chain,
8 – ball bearing,
9 – clown,
10 – plug,
11 – toddler,
12 – axis of levers of valves,
13 – holder of an axis of levers of valves,
14 – valve lever,
15 – holder of blocking of an axis of levers of valves,
16 – adjusting spring of an axis of levers of valves,
17 – flat washers,
18 – pusher,
19 – pusher core,
20 – final valve,
21 – inlet valve,
22 – crackers of fastening of a basic plate of a spring of the valve,
23 – top basic plate of a valve spring,
24 – valve spring,
25 – lower basic plate of a valve spring,
26 – valve core sealant

PERFORMANCE ORDER
1. To establish (the party with an adjusting sign (1) outside) a chain asterisk together with a spline on a bent shaft.
2. To establish a flange of the holder of an asterisk of the drive of the fuel pump together with the oil supply pipeline.
3. To install the tension device of a driving chain of system of gas distribution.
4. To establish an asterisk of the drive of the fuel pump and to turn a bent shaft so that the piston in the 1st cylinder was in VMT.

5. To establish a driving chain of system of gas distribution so that its designations of red color coincided with signs on asterisks of a cam-shaft and the fuel pump, and designation of white color – with signs on an asterisk of a bent shaft.
6. To establish an asterisk of the tension device of a chain together with the clown and to pull a chain so that to receive a gap of 0,5-1 mm between a cheek of the tension device and its holder. To tighten a roller of the tension device.
7. To replace a sealing ring of a casing of a driving chain of system of gas distribution and to screw a casing.