Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Check of a compression
      4.2.7. Removal of air from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of speed of idling
      - 4.2.11. The repair which is not demanding removal of the engine
         + 4.2.11.1. Head of the block of cylinders
         4.2.11.2. Removal and installation of the engine
         + 4.2.11.3. Dismantling, repair and assembly of the engine
         + 4.2.11.4. Lubrication system
         - 4.2.11.5. Cooling system
            4.2.11.5.1. Discharge of liquid from the cooling system
            4.2.11.5.2. Filling of system and removal of air
            4.2.11.5.3. Fan
            4.2.11.5.4. Thermostat
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



4.2.11.5. Cooling system

4.2.11.5.1. Discharge of liquid from the cooling system

GENERAL INFORMATION

Cooling system

1 – pump of cooling liquid,
2 – radiator casing,
3 – thermostat,
4 – thermostat cover,
5 – sensor of temperature of cooling liquid,
6 – pulley of the drive of the pump of cooling liquid,
7 – maple belt,
8 – roller of the tension device of a maple belt,
9 – pulley of a bent shaft,
10 – maple belts of the drive of the fan and generator,

13 – fan,
14 – fan axis,
15 – generator pulley,
16 – brush,
17 – radiator,
18 – sensor of temperature of cooling liquid,
19 – broad tank,
20 – sensor of level of cooling liquid

Discharge of liquid from the cooling system

PERFORMANCE ORDER
1. To unscrew a stopper of filling of liquid in a broad tank.
2. To establish a control lever of temperature of system of heating of salon on the maximum temperature.
3. To unscrew a stopper of discharge of cooling liquid on a radiator (it is specified by an arrow).
4. To unscrew a stopper of discharge of cooling liquid on the right side in a back part of the block of cylinders of the engine (it is specified by an arrow).
5. Under these traffic jams it is necessary to substitute the corresponding capacities and to wait cooling liquid will not flow down yet.