Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Check of a compression
      4.2.7. Removal of air from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of speed of idling
      + 4.2.11. The repair which is not demanding removal of the engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





4.2.8. Fuel filter

GENERAL INFORMATION

Knot of the fuel filter

1 – holder of the filter,

2 – the replaced filter element,

3 – settler,

4 – manual fuel pump

System of injection of fuel

1 – fuel pump,
2 – electromagnetic valve of switching off of the engine (STOP valve),
3 – holder of elements of management,
4 – the closing stopper,
5 – fuel supply pipeline coupling bolt,
6 – coupling of a returnable fuel-supply line,
7 – fuel supply pipelines,
8 – returnable fuel-supply lines of nozzles,
9 – nozzle case,
10 – spray

Replacement of the filter

PERFORMANCE ORDER
1. The replaced filter element (2 – see rice. The knot of the fuel filter) is clamped between the holder of the filter (1) and a settler (3).
2. To unscrew a bolt (V – see rice. Removal of air from fuel system) fastenings of a settler to the holder of the filter.
3. To disconnect a settler (3 – see rice. Knot of the fuel filter) and the replaced element (2) of the fuel filter.
4. To establish the new replaced element on a settler and to move up to the holder of the filter.
5. To carefully screw up a bolt (V – see rice. Removal of air from fuel system) fastenings of a settler to the holder of the filter.
6. To check tightness of connections of the fuel filter.

Removal of water from a settler

PERFORMANCE ORDER
1. To substitute capacity under the fuel filter, to weaken a drain bolt (E) and a bolt of fastening of the pipeline of removal of fuel from the filter (C – a settler).
2. To tighten both bolts after water ceases to follow.