1. To lift the car and to unscrew the pipeline of high pressure from the hydraulic pump. |
2. To remove the pipeline and to merge oil from hydraulic system. |
3. To unscrew the pipeline of low pressure. |
4. To weaken bolts of fastening of the generator and to take off maple belts. |
5. To remove back strengthening. |
6. To remove the hydraulic pump together with its arm. |
7. For installation of the pump to perform operations in the return sequence in relation to process of its removal. During this process it is necessary to pay attention to the correct tension of maple belts, installation of new laying of connections of hydraulic pipelines, the correct filling with oil and removal of air from system of steering. |