Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
- 8. Steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assembly of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and assembly of a steering wheel
   + 8.6. Steering with the hydraulic booster
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



8.1. Technical characteristics

GENERAL INFORMATION

Transfer number
19,88
Speed of a steering wheel (from an emphasis against the stop)
4,15
Diameter of a turn
10 m
Gap between a pusher and a cover of the case of a gear lath
0,015 – 0,150 mm
Thickness of laying of adjustment of a gap of rack transfer
0,06; 0,40; 0,52; 0,64; 0,76; 0,88; 1,00 mm
Resistance moment during turn of a wheel of steering transfer
0,3 – 0,13 Nanometers

Tightening moments

Fastening of the case of steering transfer to a body cross-piece
The 1st stage – 15 Nanometers;
The 2nd stage – to tighten on 90 °
Spherical hinge of steering thirst for a rotary fist
25 – 30 Nanometers
Flange of the elastic hinge to steering transfer
20 – 25 Nanometers
Cover of a driving gear wheel
17 – 24 Nanometers
Pusher cover to the case of steering transfer
6 – 9 Nanometers
Steering thirst for a gear lath
75 – 85 Nanometers
Hinge flange to a shaft of a steering wheel
20 – 25 Nanometers.
Top holder of a steering column
45 55 Nanometer
Nut of a steering wheel
45 – 55 Nanometers
Wheel nut
100 Nanometer