Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
- 8. Steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assembly of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and assembly of a steering wheel
   + 8.6. Steering with the hydraulic booster
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





8.4. Removal and installation of a steering column

Removal

PERFORMANCE ORDER
1. To establish car wheels in situation for driving forward.
2. To remove top and lower a casing of a steering column, and also a covering under the forward panel at height of a steering column.
3. To disconnect sockets of electric wires from the universal switch.
4. To remove the universal switch and the lever of opening of a cowl.
5. To unscrew a bolt of fastening of a collar of a steering column.
6. To unscrew nuts (1) of fastening of a collar of a steering column to the holder under the forward panel.
7. To unscrew a bolt of a tightening holder of a flange of the elastic hinge from a driving gear wheel of steering transfer.
8. To take knot of a steering column.

Installation

PERFORMANCE ORDER
1. To check correctness of provision of the wheels established for advance.
2. To establish a steering column on the appropriate place, without tightening a nut of its fastening.
3. To adjust the provision of a steering column of rather forward panel, observing distance of X = 5 mm between the forward panel and the top casing of a steering column.
4. To remove the top casing of a steering column.
5. To check observance of control distance (2) = 12 ± 1 mm and to tighten nuts of fastening of a collar of a column to the holder under the forward panel, a bolt of fastening of a collar of a steering column, and also a nut of the lower bolt of fastening of a shaft of a steering wheel.
6. To install the universal switch and to connect sockets of electric wires.
7. To install the lever of opening of a cowl.
8. To establish top and lower a casing of a steering column.
9. To check symmetry of provision of a steering wheel at installation of wheels for advance.