Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
- 8. Steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assembly of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and assembly of a steering wheel
   - 8.6. Steering with the hydraulic booster
      8.6.1. Technical characteristics
      8.6.2. Removal and installation of steering transfer
      8.6.3. Removal and installation of the hydraulic pump
      8.6.4. Dismantling and assembly of steering transfer of CAM GEAR
      8.6.5. Dismantling and assembly of steering transfer of ZF
      8.6.6. Removal and installation of a steering column
      8.6.7. Dismantling and assembly of a steering wheel
      8.6.8. Removal of air from system of steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



8.6.2. Removal and installation of steering transfer

GENERAL INFORMATION

Removal of steering transfer with the Cam Gear hydraulic booster


1 – fastening bolts,
2 – the pipelines of high pressure feeding the hydraulic amplifier
3 – the pipeline of high pressure giving oil to the operating valve
4 – pipeline of low pressure (oil return)

Removal

PERFORMANCE ORDER
1. To lower the engine and to connect to a coupling case.
2. To unscrew a bolt of a tightening holder of a flange of the elastic hinge and to disconnect a shaft of a steering wheel from a driving gear wheel of steering transfer.
3. To lift the car and to remove forward wheels.
4. To take forelocks and to unscrew koronchaty nuts of spherical hinges of steering drafts.
5. To disconnect steering drafts from rotary fists of wheels by means of a stripper 13.006.
6. To unscrew pipelines of high pressure from the case of transfer and to merge oil from hydraulic system.
7. To unscrew the pipeline of low pressure from the transfer case.
8. To unscrew two bolts (1) (see rice. Removal of steering transfer with the Cam Gear hydraulic booster) fastenings of the case of steering transfer to a cross-piece of a body and to take steering transfer.

Installation

PERFORMANCE ORDER
1. To install the case of steering transfer on the appropriate place and to screw up two bolts of fastening of the case of steering transfer to a body cross-piece.
2. To connect hydraulic pipelines, establishing new laying on connections.
3. To connect steering drafts to rotary fists of wheels.
4. To tighten all threaded connections the corresponding moments.
5. To establish forward wheels and to lower the car.
6. To fill in oil and to remove air from system of steering.
7. To check and in case of need to adjust a disorder / convergence of wheels.