| 1. To prepare the corresponding manometer. |
| 2. To warm up the engine up to the normal working temperature. |
| 3. To disconnect the sensor of pressure of oil from the holder of an oil filter and on its place to screw up a manometer tip. |
| 4. To start the engine and to check oil pressure at the corresponding speed of the engine (see subsection 4.2.1.3). |
| 5. From the holder of an oil filter to unscrew a tip of the manometer and to screw up the oil pressure sensor. |
| 6. To check tightness of connection of the sensor after start of the engine. |
