Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. System of ignition
      + 4.1.4. Fuel system
      - 4.1.5. The repair which is not demanding removal of the engine Removal and installation of a gear belt Removal of a head of the block of cylinders Dismantling and assembly of a head of the block of cylinders Installation of a head of the block of cylinders
      4.1.6. Removal and installation of the engine
      4.1.7. Dismantling of the engine
      4.1.8. Identification of the interacting parts
      4.1.9. Assembly of the engine
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. System of gas distribution
      4.1.13. Lubrication system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

- Removal of a head of the block of cylinders


Knot of the air filter

1 – case,

2 – cover,

3 – the filtering element,

4 – corrugated hose of an air inlet,

5 – air inlet of warm air

1. To disconnect a weight wire from the accumulator.
2. To merge cooling liquid from the cooling system (to unscrew a stopper on the right side of the block of cylinders, and also to disconnect the lower elastic pipeline from a radiator).
3. To remove the air filter, to disconnect the pipeline and draft from the carburetor and an inlet collector.
4. To disconnect electric wires from the carburetor and a head of the block of cylinders.
5. To disconnect from spark plugs of a wire of high voltage and to remove the distributor of high voltage.
6. To disconnect pipelines of cooling liquid from the camera of the starting arrangement of the carburetor, the top hose from a radiator, and also a hose of a broad tank from a head of the block of cylinders.


It is not necessary to have a head of the block of cylinders the lower plane on a horizontal surface as it threatens with damage of valves of speakers below the plane. A head of the block of cylinders it is necessary to have so that plates of valves concerned nothing.