Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. System of ignition
      + 4.1.4. Fuel system
      - 4.1.5. The repair which is not demanding removal of the engine
         4.1.5.1. Removal and installation of a gear belt
         4.1.5.2. Removal of a head of the block of cylinders
         4.1.5.3. Dismantling and assembly of a head of the block of cylinders
         4.1.5.4. Installation of a head of the block of cylinders
      4.1.6. Removal and installation of the engine
      4.1.7. Dismantling of the engine
      4.1.8. Identification of the interacting parts
      4.1.9. Assembly of the engine
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. System of gas distribution
      4.1.13. Lubrication system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





4.1.5. The repair which is not demanding removal of the engine

GENERAL INFORMATION

ONS engine knots

1 – final collector,
2 – thermostat,
3 – thermostat case,
4 – cogged pulley of the camshaft,
5 – casing of a gear belt,
6 – gear belt,
7 – lever,
8 – valve spring,
9 – head of the block of cylinders,
10 – piston,
11 – block of cylinders of the engine,
12 – pump of cooling liquid,
13 – ignition distributor,
14 – fuel pump,
15 – maple belt,
16 – klinoremenny a pulley on cranked to a shaft,
17 – the cogged pulley on cranked to a shaft,
18 – the cogged pulley on intermediate to a shaft,
19 – forward cover of a bent shaft,
20 – forward cover of an intermediate shaft,
21 – persistent plate of an intermediate shaft,
22 – intermediate shaft,
23 – bent shaft,
24 – oil pump,
25 – cover of a head of the block of cylinders,
26 – camshaft,
27 – persistent plate of the camshaft,
28 – inlet collector,
29 – сопун systems of ventilation of a case,
30 – oil separator,
31 – oil pressure sensor,
32 – oil filter,
33 – back epiploon of a bent shaft,
34 – persistent half ring of a bent shaft,
35 – oil case,
36 – oil discharge stopper