Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
- 6. Transmissions
   + 6.1. Mechanical four-speed transmission
   + 6.2. Mechanical five-speed transmission
   - 6.3. Automatic Ford C 3 transmission
      6.3.1. Technical characteristics
      6.3.2. Service and repair
      6.3.3. Check of level of oil in the transmission
      6.3.4. Check and washing of hydrokinetic transfer
      6.3.5. Check of pressure of oil in operating time of the transmission
      6.3.6. Test of an overload of the engine hydrokinetic transfer
      6.3.7. Check in the course of the movement
      6.3.8. Adjustment of a tape of a brake of forward planetary transfer
      6.3.9. Removal and installation of the transmission
      6.3.10. Removal and installation of a cable of the kick-down mechanism
      6.3.11. Removal and installation of the relay of safe start of the engine
      6.3.12. Malfunctions and methods of their elimination
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

6.3.10. Removal and installation of a cable of the kick-down mechanism

Removal and installation

PERFORMANCE ORDER

1. To disconnect a cable of a reduction of transfers from the lever of the carburetor and to remove a cover from the holder.

2. To disconnect a cable of a reduction of transfers from the lever of a reduction of transfers at the transmission.

3. To unscrew a lock-nut and to remove a cable cover from the holder.

4. To take a cable of a reduction of transfers together with a cover.

5. Installation is made in the sequence, the return to removal.

Adjustment

PERFORMANCE ORDER

1. To press against the stop a pedal of an accelerator and to check whether completely butterfly valve in the carburetor is open.

2. To move the lever of a reduction of transfers of the automatic transmission.

3. To truncate or extend a cable so that to receive a gap of 0,8-1,0 mm between a cam of an axis of the carburetor and the lever of a cable of a reduction of transfers.