Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
- 6. Transmissions
   + 6.1. Mechanical four-speed transmission
   - 6.2. Mechanical five-speed transmission
      6.2.1. Technical characteristics
      6.2.2. Removal and installation of the transmission
      6.2.3. Dismantling and assembly of the transmission
      6.2.4. Dismantling and assembly of the block of gear wheels
   + 6.3. Automatic Ford C 3 transmission
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



6.2. Mechanical five-speed transmission

6.2.1. Technical characteristics

GENERAL INFORMATION

Five-step mechanical transmission of N type

The transmission has three shaft, a classical design, four synchronized transfers forward and not synchronized transfer of a backing. The lever of gear shifting is on a floor.

Type: N.

Transfer numbers

Transfer
Transfer number of transfer
Full transfer number
At transfer number of the main transfer
3,38
3,62
3,92
1
3,65
12,34
13,27
14,31
2
1,97
6,66
7,13
7,72
3
1,37
4,63
4,96
5,37
4
1,00
3,38
3,62
3,92
5
0,82
2,77
2,97
3,21
Backing
3,66
12,37
13,25
14,35

Adjusting data

Distance between a gear wheel of the drive of a speedometer and a lock ring of the synchronizer of the 5th transfer
And = 123,5 ± 0,5 mm
Thickness of lock rings of a nave of the synchronizer of transfers 3 - 4 on secondary to a shaft
1,63; 1,74; 1,85 mm
Thickness of lock rings of the bearing of a secondary shaft in an intermediate case, and also a lock ring of the synchronizer of the 5th transfer on secondary to a shaft
1,75; 1,81; 1,87; 1,93; 1,99 mm
Thickness of lock rings of the bearing of an intermediate shaft in an intermediate case
1,88; 1,95; 2,12; 2,19; 2,26 mm

Lubricant

 Amount of oil
0,98 dm
Type
oil for the SAE 80 Ford SQM 2 C 9008 A transmission

Tightening moments

Coupling case to the block of cylinders of the engine
40 – 51 Nanometers
Coupling case to a forward part of a case of the transmission
70 – 90 Nanometers
The driveshaft to a secondary shaft of the transmission
57 – 67 Nanometers
Metal-rubber connector to a transmission suspension bracket cross-piece
16 – 20 Nanometers
Metal-rubber connector to a transmission case
50 – 57 Nanometers
Transmission suspension bracket cross-piece to a body
20 – 25 Nanometers
Back part to a forward part of a case of the transmission
45 – 49 Nanometers
 Cover to a forward part of a case of the transmission
9 – 11 Nanometers
The directing plug of the release bearing of coupling
9 – 11 Nanometers
Nut of fastening of a gear wheel of the 5th transfer on intermediate to a shaft
120 – 150 Nanometers
Basic plate of a gear wheel of the 5th transfer
21 – 26 Nanometers
Switch of fires of a backing
1 – 2 Nanometers