Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
- 9. Suspension brackets
   - 9.1. Forward suspension bracket
      9.1.1. Technical characteristics
      9.1.2. Removal and installation of a rack of a forward suspension bracket
      9.1.3. Dismantling and assembly of a rack of a suspension bracket
      9.1.4. Removal and installation of the stabilizer
      9.1.5. Replacement of the metal-rubber plug of the lever
      9.1.6. Removal and installation of a rotary fist
      9.1.7. Check of installation of forward wheels
      9.1.8. Replacement of hug bearings of a forward wheel
   + 9.2. Back suspension bracket
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


9.1.7. Check of installation of forward wheels


Installation of a convergence

1. To check pressure in wheels and a condition of protectors of tires of all wheels.
2. To check a condition of disks of wheels.
3. To check whether there is no side play in hinged connections of elements of a suspension bracket and system of steering.
4. To establish a steering wheel in situation for advance.
5. By means of the device for measurement of installation of wheels to check values of characteristic angles of installation of forward wheels (see subsection 9.1.1)
6. In case of need to adjust a convergence of wheels by rotation of steering drafts. The maximum difference between length of both steering drafts (right and left) cannot exceed 5 mm.