Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
- 9. Suspension brackets
   - 9.1. Forward suspension bracket
      9.1.1. Technical characteristics
      9.1.2. Removal and installation of a rack of a forward suspension bracket
      9.1.3. Dismantling and assembly of a rack of a suspension bracket
      9.1.4. Removal and installation of the stabilizer
      9.1.5. Replacement of the metal-rubber plug of the lever
      9.1.6. Removal and installation of a rotary fist
      9.1.7. Check of installation of forward wheels
      9.1.8. Replacement of hug bearings of a forward wheel
   + 9.2. Back suspension bracket
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

9.1.4. Removal and installation of the stabilizer

Removal

PERFORMANCE ORDER

1. To remove clamps and to unscrew 4 bolts of fastening of the stabilizer to a body.

2. To unscrew nuts of fastening of the stabilizer to the lower cross levers of a suspension bracket, to take forward metal washers and forward rubber rings (see rice. Forward suspension bracket).

3. To unscrew from both parties of a suspension bracket a nut of a bolt of fastening of the cross lever to an engine mount cross-piece.

4. To remove levers from a body and to take the stabilizer, to remove back rubber rings and back metal washers from the stabilizer.

Installation

PERFORMANCE ORDER

To install the suspension bracket stabilizer, performing operations in the return sequence in relation to removal process. Nuts of bolts of fastening of levers of a suspension bracket to a cross-piece of an engine mount should be tightened in two stages (see subsection 9.1.1) having only lowered the car.