Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
- 9. Suspension brackets
   - 9.1. Forward suspension bracket
      9.1.1. Technical characteristics
      9.1.2. Removal and installation of a rack of a forward suspension bracket
      9.1.3. Dismantling and assembly of a rack of a suspension bracket
      9.1.4. Removal and installation of the stabilizer
      9.1.5. Replacement of the metal-rubber plug of the lever
      9.1.6. Removal and installation of a rotary fist
      9.1.7. Check of installation of forward wheels
      9.1.8. Replacement of hug bearings of a forward wheel
   + 9.2. Back suspension bracket
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


9.1.3. Dismantling and assembly of a rack of a suspension bracket

1. To remove a suspension bracket rack.
2. To clamp the lower part of a rack of a suspension bracket in a vice.
3. To install the device 14.021 for compression of springs and to squeeze a suspension bracket spring.
4. To unscrew a nut of fastening of basic laying of a rack of a suspension bracket, blocking a shock-absorber rod a key for six-sided nests of 6 mm.
5. To take basic laying, the basic bearing, the top basic plate springs, a rubber casing, and also the compressed spring together with adaptation.
6. To remove the rubber buffer from a shock-absorber rod.
7. To check a condition of details and purity of basic plates of a spring.


To collect a suspension bracket rack, performing operations in the return sequence in relation to removal process. To pay attention to the correct installation of a spring in basic plates.