Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
- 7. Driveshaft and back bridge
   7.1. Technical characteristics
   7.2. Removal and installation of the driveshaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assembly of the back bridge
   7.6. Dismantling and assembly of differential
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assembly and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
   + 7.11. Half shafts
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



7.4. Removal and installation of the back bridge

GENERAL INFORMATION

Zadny Bridge

And – the remote plug,

In – laying,

With – a flange of adjustment of a gap of the main transfer

Zadny Bridge

1 – case,
2 – differential bearings,
3 – leading gear wheel of the main transfer,
4 – the conducted gear wheel of the main transfer,
5 – cover of a case of the back bridge,
6 – differential box,
7 – semi-axial gear wheels,
8 – sattelita,
9 – type-setting laying,
10 – nut of the bearing of the leading gear wheel,
11 – a flange of the leading gear wheel for connection with the back hinge of the driveshaft,
12 – flange nut,
13 – sealing ring,
14 – blocking flange,
15 – holder of the bearing,
16 – compensation washer

Removal

PERFORMANCE ORDER
1. To lift the car.
2. To remove back wheels.
3. To remove brake drums.
4. To remove naves of wheels and a half shaft (see the corresponding description in subsection 7.11.1).
5. To remove the bearing brake boards.
6. To remove the driveshaft (see subsection 7.2).
7. To prop up the back bridge by means of a jack.
8. To disconnect an element of back fastening of the bridge to a body.
9. To disconnect elements of forward fastening of the bridge to a beam of a back axis (1 – hinge flange bolts, 2 – bolts of fastening of a katrer of the back bridge).
10. To take the back bridge.

Installation

PERFORMANCE ORDER

To perform operations in the return sequence in relation to removal process. After installation it is necessary to check oil level in a case of the back bridge.