Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
- 7. Driveshaft and back bridge
   7.1. Technical characteristics
   7.2. Removal and installation of the driveshaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assembly of the back bridge
   7.6. Dismantling and assembly of differential
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assembly and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
   + 7.11. Half shafts
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



7.10. Replacement of a sealing ring of a gear wheel of the main transfer

Replacement without removal of the back bridge

PERFORMANCE ORDER
1. To lift the car.
2. To disconnect the driveshaft from a flange of a gear wheel of the main transfer and to suspend a shaft to a body.
3. By means of adaptation 15.030 to unscrew nuts of fastening of a flange of a gear wheel of the main transfer.
4. To remove a flange from a gear wheel of the main transfer by means of the corresponding stripper.
5. To take a sealing ring of a gear wheel by means of adaptation 15.072.
6. To establish a new sealing ring by means of adaptation 15.047 A (not to wipe factory lubricant from a sealing edge of a ring).
7. To establish a flange on a gear wheel of the main transfer, to put on a nut of fastening of a flange and to tighten it by means of adaptation 15.030.
8. To attach the driveshaft to a flange of a gear wheel of the main transfer.