Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      - 4.2.4. Nozzles
         4.2.4.1. Check of tightness of a spray of a nozzle
         4.2.4.2. Adjustment of initial pressure of injection
      4.2.5. Glow plugs
      4.2.6. Check of a compression
      4.2.7. Removal of air from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of speed of idling
      + 4.2.11. The repair which is not demanding removal of the engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



4.2.4.1. Check of tightness of a spray of a nozzle

GENERAL INFORMATION

Check of nozzles on tightness


PERFORMANCE ORDER
1. It is made on the device for check of sprays.
2. To establish a nozzle on the device and to create pressure of opening of a nozzle 2,0 MPas lower than pressure.
3. If within 10 seconds on the acting part of a spray around a needle there is no fuel in the form of the falling drop – the nest of a spray is tight /
4. At slightly worn-out spray, its ledge is slightly humidified, without formation of a drop.