Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
- 4. Engines
+ 4.1. Petrol engines
- 4.2. Diesel engine
- 4.2.1. Technical characteristics
4.2.1.1. Block of cylinders
4.2.1.2. Krivoshipno-shatunny mechanism
4.2.1.3. Lubrication system
4.2.1.4. Fuel system
4.2.1.5. Tightening moments
4.2.2. Check and adjustment of gaps of valves
+ 4.2.3. Fuel system
+ 4.2.4. Nozzles
4.2.5. Glow plugs
4.2.6. Check of a compression
4.2.7. Removal of air from fuel system
4.2.8. Fuel filter
4.2.9. Fuel pump, installation of the beginning of injection of fuel
4.2.10. Adjustment of speed of idling
+ 4.2.11. The repair which is not demanding removal of the engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
|
The pig-iron block of cylinders has the cylinders executed directly in its material. Has five nests of radical bearings of a bent shaft and three nests of bearings of a cam-shaft.
| Diameter of cylinders: |
| – nominal: |
| • group A |
94,000 – 94,015 mm
|
| • group B |
94,015 – 94,030 mm
|
| – 1st repair size: |
| • group C |
94,200 – 94,215 mm;
|
| • group D |
94,215 – 94.230 mm
|
| – 2nd repair size: |
| • group E |
94,400 – 94,415 mm
|
| • group F |
94,415 – 94,430 mm
|
| – 3rd repair size: |
| • group G |
94,600 – 94,615 mm
|
| • group N |
94,615 – 94,630 mm
|
| Diameters of openings of nests of the directing pushers of valves: |
| – nominal size |
24,00 – 24,03 mm
|
| – repair size |
24,20 – 24,23 mm
|
|
|
