Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
   11.1. Care of a body
   - 11.2. Body elements
      11.2.1. Cowl cable
      11.2.2. Adjustments of a cowl
      - 11.2.3. Doors Internal upholstery of a door Adjustment of closing of the lock of a door Internal door handle Door lock cylinder Door lock Forward sitting
+ 12. Electric equipment

- Internal door handle


1. To remove an internal upholstery of a door.
2. Being careful to remove the condensing film about the door handle and drafts.
3. To unscrew two screws (13) (see rice. Mechanism of closing of a door), to reject the lower part from a door and to disconnect the top part from a door.
4. To raise drafts (12) (see rice. Mechanism of closing of a door) and to get from a door framework.
5. To disconnect draft of the internal door handle, and then draft of opening of the lock from a back part of the door handle.
6. To remove the door handle.


Installation is made in the sequence of the return to removal. Special attention needs to be paid to gluing of the condensing film as at untight gluing of a film in interior of the car drafts are possible.