Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
   11.1. Care of a body
   - 11.2. Body elements
      11.2.1. Cowl cable
      11.2.2. Adjustments of a cowl
      - 11.2.3. Doors
         11.2.3.1. Internal upholstery of a door
         11.2.3.2. Adjustment of closing of the lock of a door
         11.2.3.3. Internal door handle
         11.2.3.4. Door lock cylinder
         11.2.3.5. Door lock
         11.2.3.6. Forward sitting
+ 12. Electric equipment


a773976c



11.2.3. Doors

11.2.3.1. Internal upholstery of a door

GENERAL INFORMATION

Fastenings in a forward part of a motor compartment

1 – lock,
2 – internal handle,
3 – rivets of fastening of guides of glass,
4 – fastening of the mechanism of a window regulator

Removal

PERFORMANCE ORDER
1. To remove an internal decorative overlay of an external rear-view mirror.
2. To remove the handle of raising of glass for what to raise the cap which is on an axis of the handle and having unscrewed the screw to pull the handle on itself.
3. To remove a plastic pocket for what to unscrew fixing screws, to disconnect a pocket behind, to lift up and to get from the lower elements of fastening.
4. To unscrew two screws of a plastic niche of the handle of the door lock and to take out a niche.
5. To unscrew the screw of fastening of a cover of the internal door handle, to put the handle in position "openly" and to uncover.
6. On perimeter to delay an internal upholstery from a door framework (in the cars manufactured till December, 1996).
7. On perimeter to unscrew screws of fastening and to remove an upholstery (in the cars manufactured since January, 1997).

Installation

PERFORMANCE ORDER
1. Before installation to replace the damaged clips and to check correctness of installation of clips in holders.
2. To put an upholstery to a door framework so that clips were established opposite to openings and easy blows of a palm to fix an upholstery.
3. To install the handle of raising of glass so that at completely lifted glass it was directed at an angle 45 ° forward and up. To perform other operations in the sequence of the return to removal.