1982-1993 of release
Repair and operation of the car
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
11.1. Care of a body
- 11.2. Body elements
11.2.1. Cowl cable
11.2.2. Adjustments of a cowl
+ 11.2.3. Doors
+ 12. Electric equipment
Открыть букмекерскую контору +по франшизе на сайте wagergun.eu.
Ручной инструмент и садовый инвентарь оптом.
Смотрите здесь продвижение ресторана.
The cowl is hung on two loops on the rear edge. The increased openings in arms for fastening of loops on a cowl allow adjustment of provision of a cowl in a body aperture. At adjustment weaken bolts of fastening of loops, displace a cowl so that gaps between it and wings were identical, izatyagivat bolts.
Forward part of a cowl leans on a rezinovyebufer. Rolling or turning out rubber buffers it is possible to regulate a forward part of a cowl on height.
The cowl in a closed position is fixed for the probe (2) which is screwed up in a cowl and is stopped by a lock-nut. Changing position of the probe on height, regulate a cowl in relation to front surfaces переднихкрыльев. In case of unreliable locking of a cowl the lock weaken a lock-nut of fastening of the probe and displace it at the expense of the increased opening in a cowl, trying to obtain coaxiality with a lock nest. Upon termination of adjustment tighten a lock-nut.