Ford Sierra

1982-1993 of release

Repair and operation of the car



Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and installation of coupling
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. Coupling pedal mechanism
   5.6. Replacement of a pedal of coupling
   5.7. Release bearing of coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


a773976c



5.6. Replacement of a pedal of coupling

Removal

PERFORMANCE ORDER
1. To disconnect a coupling cable from the lever and a pedal of coupling, without removing a cable.
2. To remove a spring clip and the expansion plug from an axis of a pedal of coupling.
3. To remove a coupling pedal assembled.
4. To remove from two parties of a pedal of the plug and to take a gear segment.
5. To remove a spring.
6. To remove one of the fixing brackets from a latch axis, to remove an axis and a latch with a spring.
7. To clear details of the mechanism and to establish wear degree.

Installation

PERFORMANCE ORDER
1. To grease an axis of a latch and the gear sector with graphite lubricant and to establish on a pedal.
2. To insert the gear sector with a spring into a pedal and record two plugs.
3. To lift a latch and to turn the sector so that the latch leaned on a smooth surface behind teeths.
4. To establish the spring turning the gear sector.
5. To establish a pedal of coupling with the expansion plug.
6. To connect a coupling cable.