Ford Siyerra + 1.2. Identification of the car + 2. Maintenance + 3. General data + 4. Engines + 5. Coupling + 6. Transmissions + 7. Driveshaft and back bridge + 8. Steering + 9. Suspension brackets - 10. Brake system 10.1. Technical characteristics - 10.2. Forward brakes 10.2.1. Replacement of brake shoes 10.2.2. Replacement of a support 10.2.3. Replacement of a brake disk 10.2.4. Repair of a support + 10.3. Back brakes 10.4. Removal and installation of the main brake cylinder 10.5. Removal of air from the brake system 10.6. Adjustment of the emergency brake + 11. Body + 12. Electric equipment
|
Prevention
Disks of both forward brakes have to have the identical thickness and a condition of a surface, only then both wheels will be braked at the same time. Therefore it is recommended to replace at the same time both disks.
Removal
PERFORMANCE ORDER |
1. To remove brake shoes (see subsection 10.2.1). |
2. In cars with the engine 2,0 of dm3 to suspend a support to a body by means of a wire to protect a brake hose from damage. |
3. To unscrew the holder of a support from a rotary fist of a wheel. |
4. To unscrew the screw of fastening of a brake disk from a nave of a wheel and to remove a brake disk. |
|
Installation
PERFORMANCE ORDER |
1. To establish a brake disk and to screw up the screw of its fastening to a wheel nave. |
2. To screw the holder of a support on a rotary fist of a wheel. |
3. To establish brake shoes (see subsection 10.2.1) and a support (see subsection 10.2.2). |
4. To establish wheels, to lower the car and to tighten nuts of fastening of wheels. |
5. It is several times strong to press a brake pedal to bring into contact brake shoes with a brake disk. |
|
|
|