Ford Sierra

1982-1993 of release

Repair and operation of the car

Ford Siyerra
+ 1.2. Identification of the car
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
- 7. Driveshaft and back bridge
   7.1. Technical characteristics
   7.2. Removal and installation of the driveshaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assembly of the back bridge
   7.6. Dismantling and assembly of differential
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assembly and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
   + 7.11. Half shafts
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

7.5. Dismantling and assembly of the back bridge

PERFORMANCE ORDER

1. To locate the back bridge on the corresponding holder (adaptation 15.070).
2. To unscrew bolts of Torx of fastening of a cover of the back bridge, to uncover and merge oil from a case.
3. To remove the plates fixing a flange of adjustment of a gap of bearings of differential. To designate their situation.
4. To remove flanges (8, see rice. Zadny Bridge) of adjustment of a gap of bearings, and also differential box (key 15.071).
	5. To unscrew a nut of fastening of a flange to a gear wheel of the main transfer (adaptation 15.040).
6. By means of the corresponding universal stripper to remove a flange from a gear wheel.
	7. To unscrew a nut of fastening of bearings of a gear wheel of the main transfer (adaptation 15.073 and a cap curved key of 36 mm).
8. To take a gear wheel of the main transfer, the conic bearing and the remote plug.