Sitting lobbies
Adjustment of forward sitting
|
1 – lever of longitudinal adjustment
|
2 – handle of adjustment of an inclination of a back |
LONGITUDINAL ADJUSTMENT
| PERFORMANCE ORDER |
|
|
1. To extend the lever (1) of longitudinal adjustment located under sitting from an axis of symmetry of the car and to hold it in this situation. In some versions of equipment of cars there is a possibility of regulation of height of sitting of the driver turn of the handle (3) in the lower part of sitting from doors. For rise of sitting it is necessary to turn the handle counterclockwise, and for lowering – clockwise. |
| 2. To move sitting to the chosen situation is longitudinal and to release the lever of longitudinal adjustment. |
| 3. To move sitting it is a little before blocking of forward sitting forward and back. |
|
ADJUSTMENT OF THE INCLINATION OF THE SEATBACK
|
|
The tilt angle of a back of sitting can be changed turn of the handle (2) located in the bottom of a back from doors. |
ADJUSTMENT OF THE BEND OF THE SUPPORT OF THE WAIST
|
|
In some versions of equipment of cars adjustment of a bend of a support of a waist by turn of the handle (4) located on support inside is possible. |
Back sitting
FOLDING OF NOT DIVIDED BACK
| PERFORMANCE ORDER |
|
|
1. To lift two buttons located on each side backs. |
| 2. To incline a back forward. |
|
FOLDING OF THE DIVIDED BACK
| PERFORMANCE ORDER |
| Cars with a body of Berlin |
|
|
1. To lift the button which is behind that part of a back which has to be put. |
| |
2. To put the unblocked part of a back forward. |
| Cars with a body the Sedan |
| 1. To open a luggage carrier. |
|
2. To pull for the button of an unblocking of the corresponding part of a back (the rychazhok of an unblocking is available from within a luggage carrier.). |
| 3. To put the corresponding part of a back forward. |
|
FOLDING OF BACK SITTING
| PERFORMANCE ORDER |
| To pull for the tape which is in a back part of sitting, to raise and turn sitting forward. |
|
Folding of the back shelf
| PERFORMANCE ORDER |
| 1. For extraction of the back shelf (only two volume bodies) it is necessary to unhook drafts from hooks in a back door. |
| 2. To take from guides of an axis of turn of the shelf. |
|
Head restraints
For change of height of a head restraint it is necessary to move it in the corresponding direction.
|
|
Extraction of a head restraint demands pressing of the button which is about the right guide. |
|
